在 CNC 零件的制造旅程中，鍍層質量如同零件的 “華麗外衣”，不僅關乎外觀美感，更直接影響其耐腐蝕性與使用壽命。然而，零件表面殘留的油污就像頑固的 “攔路虎”，阻礙著優質鍍層的形成。高壓清洗機憑借強大的清潔能力，化身沖鋒陷陣的 “清潔勇士”，在去除油污、提升 CNC 零件鍍層質量的戰場上大展身手。

　　In the manufacturing process of CNC parts, the quality of the coating is like the "gorgeous coat" of the part, which not only affects its appearance beauty, but also directly affects its corrosion resistance and service life. However, the residual oil stains on the surface of the parts are like stubborn "roadblocks" that hinder the formation of high-quality coatings. The high-pressure cleaning machine, with its powerful cleaning ability, transforms into a "cleaning warrior" charging forward, demonstrating its skills on the battlefield of removing oil stains and improving the quality of CNC parts coating.

　　CNC 零件在加工過程中，油污的產生難以避免。切削液、潤滑油等在加工時附著于零件表面，形成一層薄薄的油膜。這些油污看似不起眼，卻會在零件進行鍍層處理時引發諸多問題。油污的存在會破壞鍍層與零件表面的結合力，導致鍍層出現起泡、剝落等缺陷；還會影響鍍液的均勻分布，使鍍層表面產生麻點、色澤不均等情況，嚴重降低鍍層質量。因此，在進行鍍層工藝前，徹底清除零件表面油污成為關鍵一步，而高壓清洗機正是解決這一難題的得力工具。

　　During the machining process of CNC parts, the generation of oil stains is difficult to avoid. Cutting fluid, lubricating oil, etc. adhere to the surface of the parts during machining, forming a thin oil film. These oil stains may seem inconspicuous, but they can cause many problems during the coating treatment of parts. The presence of oil stains can damage the adhesion between the coating and the surface of the parts, leading to defects such as blistering and peeling of the coating; It will also affect the uniform distribution of the plating solution, causing pitting and uneven color on the surface of the coating, seriously reducing the quality of the coating. Therefore, thoroughly removing oil stains from the surface of the parts before the plating process becomes a crucial step, and high-pressure cleaning machines are a powerful tool to solve this problem.

　　高壓清洗機能夠高效去油污，得益于其獨特的工作原理。它通過水泵將水加壓，使水流以極高的速度噴出，形成具有強大沖擊力的高壓水柱。這股高壓水柱如同 “無形的利刃”，能夠瞬間沖破零件表面的油污層，將附著的油污剝離。同時，高壓水流在沖擊零件表面時會產生空化效應，水流中的微小氣泡在高壓下迅速破裂，產生巨大的能量，進一步瓦解頑固的油污，將其分解成細小顆粒，隨水流沖走。無論是零件表面的平面區域，還是復雜的溝槽、孔洞等隱蔽部位，高壓清洗機都能憑借強勁的水流深入其中，實現全方位、無死角的清潔。

　　High pressure cleaning machines can efficiently remove oil stains, thanks to their unique working principle. It pressurizes water through a water pump, causing the water flow to spray out at extremely high speeds, forming a high-pressure water column with strong impact force. This high-pressure water column is like an "invisible blade" that can instantly break through the oil stains on the surface of the parts and peel off the attached oil stains. At the same time, high-pressure water flow will produce cavitation effect when impacting the surface of the parts. The tiny bubbles in the water flow will quickly burst under high pressure, generating huge energy, further decomposing stubborn oil stains into small particles, which will be washed away with the water flow. Whether it is the flat surface area of the part or the hidden parts such as complex grooves and holes, the high-pressure cleaning machine can penetrate deep into it with strong water flow, achieving all-round and blind spot cleaning.

　　為了更好地去除油污、提升清洗效果，高壓清洗機在實際操作中還會搭配專用的清洗劑。針對不同類型的油污，選擇相應特性的清洗劑，如堿性清洗劑對于動植物油有良好的乳化和皂化作用，能夠將油污分解成可溶于水的物質；有機溶劑型清洗劑則對礦物油有較強的溶解能力。在清洗時，先將清洗劑按照合適的比例與水混合，再通過高壓清洗機噴出。清洗劑在高壓水流的作用下，能夠更快速地滲透到油污內部，加速油污的分解和剝離過程。同時，清洗劑還能在零件表面形成一層保護膜，防止清洗后的零件表面再次吸附油污，為后續的鍍層工藝提供更潔凈的表面。

　　In order to better remove oil stains and improve cleaning efficiency, high-pressure cleaning machines are also equipped with specialized cleaning agents in practical operation. Select cleaning agents with corresponding characteristics for different types of oil stains, such as alkaline cleaning agents, which have good emulsification and saponification effects on animal and vegetable oils, and can decompose oil stains into water-soluble substances; Organic solvent based cleaning agents have strong solubility for mineral oil. When cleaning, first mix the cleaning agent with water in the appropriate proportion, and then spray it out through a high-pressure cleaning machine. Under the action of high-pressure water flow, cleaning agents can penetrate into the interior of oil stains more quickly, accelerating the decomposition and peeling process of oil stains. At the same time, the cleaning agent can also form a protective film on the surface of the parts to prevent the cleaned parts from adsorbing oil stains again, providing a cleaner surface for subsequent coating processes.

　　使用高壓清洗機清洗 CNC 零件時，操作參數的合理設置至關重要。清洗壓力是影響清洗效果的關鍵因素之一，壓力過小，水流沖擊力不足，難以徹底清除油污；壓力過大，則可能對零件表面造成損傷，尤其是對于一些材質較軟或表面精度要求高的零件。因此，需要根據零件的材質、結構以及油污的頑固程度，精確調整清洗壓力。一般來說，對于普通金屬零件且油污較輕的情況，較低壓力即可滿足清洗需求；而對于油污較重或材質較硬的零件，則需適當提高壓力。清洗時間也需要嚴格把控，時間過短，油污清洗不徹底；時間過長，不僅浪費資源，還可能對零件產生不良影響。通常會通過試驗和經驗總結，確定每種類型零件的最佳清洗時間。此外，清洗的角度和距離也會影響清洗效果，操作人員需要不斷調整高壓清洗機噴頭與零件的角度和距離，確保水流能夠充分覆蓋零件表面，達到最佳的清洗效果。

　　Reasonable setting of operating parameters is crucial when using a high-pressure cleaning machine to clean CNC parts. Cleaning pressure is one of the key factors affecting the cleaning effect. If the pressure is too low and the water flow impact is insufficient, it is difficult to completely remove oil stains; Excessive pressure may cause damage to the surface of parts, especially for parts with soft materials or high surface accuracy requirements. Therefore, it is necessary to accurately adjust the cleaning pressure based on the material, structure, and degree of oil contamination of the parts. Generally speaking, for ordinary metal parts with light oil stains, lower pressure can meet the cleaning requirements; For parts with heavy oil stains or hard materials, it is necessary to increase the pressure appropriately. The cleaning time also needs to be strictly controlled. If the time is too short, the oil stains may not be thoroughly cleaned; Excessive time not only wastes resources, but may also have adverse effects on parts. Usually, the optimal cleaning time for each type of component is determined through experimentation and empirical analysis. In addition, the angle and distance of cleaning can also affect the cleaning effect. Operators need to constantly adjust the angle and distance between the high-pressure cleaning machine nozzle and the parts to ensure that the water flow can fully cover the surface of the parts and achieve the best cleaning effect.

　　經過高壓清洗機的深度清潔，CNC 零件表面的油污被徹底清除，呈現出潔凈、光潔的狀態。這種干凈的表面為鍍層工藝創造了理想條件。在進行鍍層時，鍍液能夠均勻地附著在零件表面，與零件基體緊密結合，形成致密、均勻的鍍層。鍍層的附著力、耐腐蝕性和外觀質量都得到顯著提升，有效延長了 CNC 零件的使用壽命，使其在各種復雜工況下都能保持良好的性能。

　　After deep cleaning by a high-pressure cleaning machine, the oil stains on the surface of CNC parts are thoroughly removed, presenting a clean and smooth state. This clean surface creates ideal conditions for the plating process. When coating, the plating solution can uniformly adhere to the surface of the part, tightly bond with the part substrate, and form a dense and uniform coating. The adhesion, corrosion resistance, and appearance quality of the coating have been significantly improved, effectively extending the service life of CNC parts and enabling them to maintain good performance under various complex working conditions.

　　從與油污的激烈對抗，到為優質鍍層奠定基礎，高壓清洗機在 CNC 零件制造過程中扮演著不可或缺的角色。它以強大的清潔能力，成功攻克油污難題，助力 CNC 零件從 “油垢纏身” 邁向 “鍍層完美”，為制造業的高質量發展貢獻著重要力量。

　　From the fierce battle against oil pollution to laying the foundation for high-quality coatings, high-pressure cleaning machines play an indispensable role in the manufacturing process of CNC parts. It has successfully overcome the problem of oil pollution with its powerful cleaning ability, helping CNC parts move from "oil stains" to "perfect coating", and contributing an important force to the high-quality development of the manufacturing industry.

　　本文由CNC高壓清洗機友情奉獻.更多有關的知識請點擊:http://www.nianyankeji.cn我們將會對您提出的疑問進行詳細的解答，歡迎您登錄網站留言.

　　This article is a friendly contribution from CNC high-pressure cleaning machine For more information, please click: http://www.nianyankeji.cn We will provide detailed answers to your questions. You are welcome to log in to our website and leave a message