為了將清洗消毒機等處理設備的效率性能更大化，對設備及其部件進行常規檢查是非常重要的。所以說清洗機檢查的一些關鍵點要知道，下面來講講吧。

In order to maximize the efficiency and performance of treatment equipment such as cleaning and disinfection machines, it is very important to carry out routine inspection of equipment and its components. So we should know some key points of cleaning machine inspection. Let's talk about it next.

噴嘴無污染或堵塞。如果孔口堵塞，就會阻礙水流和水壓，影響清洗機的性能。清洗機的水在清洗循環過程中被循環利用，其中攜帶的污染物可能停留在噴淋臂內。噴淋臂應定期清洗。

The nozzle is free of pollution or blockage. If the orifice is blocked, the water flow and water pressure will be blocked, affecting the performance of the cleaning machine. The water of the cleaning machine is recycled during the cleaning cycle, and the pollutants carried in it may stay in the spray arm. The spray arm should be cleaned regularly.

噴淋臂上的出水孔面向目標表面。部分清洗機的噴臂在使用過程中松動和旋轉，導致噴臂不能面向儀器。許多噴臂兩側都有孔；這些孔可以向上或向下調整。

The water outlet hole on the spray arm faces the target surface. The spray arm of some cleaning machines loosens and rotates during use, resulting in that the spray arm cannot face the instrument. Many spray arms have holes on both sides; These holes can be adjusted up or down.

清洗機底部的排水屏上無雜物：清洗機底部的排水屏會保留儀表組的污染物。篩網至少每天拆下清洗一次，或根據使用次數增加清洗次數。堵塞的篩網會阻礙水流和排水，從而影響清洗機的清洗效果。

There are no sundries on the drainage screen at the bottom of the washing machine: the drainage screen at the bottom of the washing machine will retain the pollutants of the instrument cluster. The screen shall be removed and cleaned at least once a day, or the cleaning times shall be increased according to the times of use. The blocked screen will block the water flow and drainage, thus affecting the cleaning effect of the cleaning machine.

噴淋臂襯套完好無損：確保所有襯套、聯軸器、墊圈等完好無損，無裂縫或損壞。

Spray arm bushing intact: ensure that all bushings, couplings, washers, etc. are intact without cracks or damage.

洗滌劑/化學品輸送管道清晰、功能齊全：目視檢查所有洗滌劑和其他化學品輸送管道及連接端口，確保管道暢通、清潔、無堵塞、堵氣、無扭結。還應檢查管道上的磨損痕跡、損壞或泄漏。如果輸送管道有缺陷，清洗液的濃度可能不正確，從而使清洗周期失效。

Detergent / chemical transmission pipelines are clear and fully functional: visually inspect all detergent and other chemical transmission pipelines and connection ports to ensure that the pipelines are unblocked, clean, free of blockage, air blockage and kink. The pipes should also be checked for signs of wear, damage or leakage. If the delivery pipeline is defective, the concentration of cleaning solution may be incorrect, which will invalidate the cleaning cycle.

檢查所有化學品和清洗劑的濃度是否正確：確保清洗劑和其他化學品容器內的余量充足，并確保輸配管道正確連接到相應的容器上。

Check whether the concentration of all chemicals and cleaning agents is correct: ensure that the residue in the containers of cleaning agents and other chemicals is sufficient, and ensure that the transmission and distribution pipelines are correctly connected to the corresponding containers.

山東超聲波清洗機廠家建議您要觀察清洗機的整體狀況：機艙內表面應清潔，無污垢、水垢等污染物。這些都會影響清洗機的性能和清洗效果。污漬和水垢可能表明水質問題，化學物質濃度高等。確保所有適用的墊圈、密封圈和記錄儀處于正常狀態。

Shandong ultrasonic cleaning machine manufacturer recommends you to observe the overall condition of the cleaning machine: the inner surface of the engine room should be clean and free of dirt, scale and other pollutants. These will affect the performance and cleaning effect of the cleaning machine. Stains and scale may indicate water quality problems and high chemical concentrations. Ensure that all applicable gaskets, seals, and recorders are in good condition.

只有做好清洗機前期的測試及檢查，才能確保清洗機設備完好，能投入到工作中使用，才能更大化的提供清洗效果，更對相關內容就來我們網站www.nianyankeji.cn咨詢吧。

Only by doing a good job in the early testing and inspection of the washing machine can we ensure that the washing machine equipment is in good condition, can it be put into use in work, and can we provide a greater cleaning effect. For more relevant content, please come to our website www.nianyankeji.cn for consultation.