1、準備清洗液：根據物品的污垢種類選擇合適的清洗液，通常使用的清洗液是水或乙醇。需要注意的是，清洗液中應該加入適量的清洗劑，以提高清洗效果。

1. Prepare cleaning solution: Choose a suitable cleaning solution based on the type of dirt on the item, usually using water or ethanol as the cleaning solution. It should be noted that an appropriate amount of cleaning agent should be added to the cleaning solution to improve the cleaning effect.

2、裝載物品：將需要清洗的物品放入清洗機的清洗槽中，注意不要將物品堆放在一起，應該盡量分散放置。

2. Loading items: Put the items that need to be cleaned into the cleaning tank of the cleaning machine, being careful not to stack them together, and should be placed as scattered as possible.

3、設置清洗參數：根據清洗液的種類和物品的污垢程度，設置清洗機的超聲波功率、清洗時間和清洗溫度等參數。需要注意的是，不同種類的物品和不同種類的污垢，其清洗參數也有所不同，應該根據具體情況進行設置。

3. Set cleaning parameters: Based on the type of cleaning solution and the degree of dirt on the item, set parameters such as ultrasonic power, cleaning time, and cleaning temperature of the cleaning machine. It should be noted that the cleaning parameters vary for different types of items and dirt, and should be set according to specific circumstances.

4、開始清洗：按下清洗機的啟動按鈕，清洗機會自動進行清洗過程。在清洗過程中，可以觀察清洗液的狀態，如果清洗液變渾或者污垢較多，應該及時更換清洗液。

4. Start cleaning: Press the start button of the cleaning machine, and the cleaning machine will automatically start the cleaning process. During the cleaning process, the condition of the cleaning solution can be observed. If the cleaning solution becomes cloudy or has a lot of dirt, it should be replaced in a timely manner.

5、取出物品：清洗時間到達后，清洗機會自動停止，此時應該將清洗好的物品從清洗槽中取出，然后用清水將物品清洗干凈。

5. Removing items: After the cleaning time is up, the cleaning machine will automatically stop. At this time, the cleaned items should be taken out of the cleaning tank and then cleaned with clean water.

本文由超聲波清洗機友情奉獻.更多有關的知識請點擊: http://www.nianyankeji.cn 真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

This article is a friendly contribution from ultrasonic cleaning machines. For more related knowledge, please click: http://www.nianyankeji.cn Sincere attitude. We will provide you with comprehensive service. We will gradually contribute more relevant knowledge to everyone. Stay tuned